Loading... Please wait...
- Home
- Airsoft for Beginners
- Airsoft Rifle Starter Kits
- Lancer Tactical Rapid Deployment Carbine Starter Kit
Lancer Tactical Rapid Deployment Carbine Starter Kit
)
Fox Airsoft Starter Packages
Our new and improved Fox Start Packages include everything you need to start playing. If you don't need all the safety gear, the basic starter pack will include the bare essentials to get your gun up and running and have enough ammo and batteries to last in a day of airsoft.
COMPLETE STARTER PACK:
- Lancer Tactical Rapid Deployment Carbine
- Auto-Stop Charger
- Mesh face mask
- Full-seal Z87+ ANSI rated dual pane goggles
- Upgraded 9.6v NiMh 1600mAh battery
- 2700 count .25g BBs
- Nylon rifle bag
Total Package Value: $275 ($50 savings!)
BASIC STARTER PACK:
- Lancer Tactical Rapid Deployment Carbine
- Auto-Stop Charger
- Upgraded 9.6v NiMh 1600mAh battery
- 2700 count .25g BBs
Total Package Value: $205 ($30 savings!)
About the Lancer Tactical Rapid Deployment Carbine:
The Lancer Tactical Rapid Deployment Carbine is a gun that both Lancer Tactical and Lonex had a hand in making. It uses Lonex's high quality internal parts to make a fun and durable gun. The front of the gun features a rail system which allows you to attach most common accessories with ease. The included magazine is a 120-round mid cap magazine.
What's Included In The Box:
-
Lancer Tactical Rapid Deployment Carbine Airsoft Gun
-
1 x 120 Rd. High Capacity Lancer Tactical Magazine
-
Cleaning Rod
-
Lancer Tactical User Manual
Quick Overview:
-
Available in Black
-
Metal Gearbox with solid internals
-
Nylon Fiber Body and Outer Barrel
-
Shoots 370 - 390 FPS out of the box
-
Crane Stock
-
Removable backup iron sights
Technical Specifications:
-
Model Number LT-107AB
-
Muzzle Velocity: 370 - 390 FPS with .20 gram BB's
-
Inner Barrel Length: 266mm
-
Inner Barrel Diameter: 6.01mm
-
Colors: Black
Weight & Dimensions:
-
Dry Weight of gun without mag is only 4lbs 8oz
-
Weight of gun with battery: 5lbs
-
Entire package weight: 6lbs 9oz
-
Gun Length: 27.25 Inches (693 Millimeters) with collapsed Stock
-
Gun Length: 31 Inches (788 Millimeters)with extended stock
Q&A:
Q: What battery should I use in the Lancer Tactical Rapid Deployment Carbine Airsoft Gun?
A: The battery compartment is located in the stock of the Lancer Tactical Rapid Deployment Carbine Airsoft Gun allowing you to use most panel or butterfly type batteries. The gearbox is fully lipo ready and able to be used with a 7.4v or 11.1v lipo battery.
Q: Where is the battery compartment in the Lancer Tactical Rapid Deployment Carbine Airsoft Gun?
A: The battery in the Lancer Tactical Rapid Deployment Carbine Airsoft Gun sits in the stock of the gun. To access the compartment you pinch the two tabs on either side of the stock and then pull back on the rubber buttpad. Then you just need to remove the polymer stopper.
Q: What weight bbs should I use in the Lancer Tactical Rapid Deployment Carbine Airsoft Gun?
A: We recommend using 0.25g-0.28g bbs for outdoor games for a great balance of range and accuracy. For indoor games 0.20g bbs will work well as you don’t have to account for wind or other environmental factors.
Q: Where is the hop up adjustment on the Lancer Tactical Rapid Deployment Carbine Airsoft Gun?
A: The hop up adjustment on the Lancer Tactical Rapid Deployment Carbine Airsoft Gun is located under the mock bolt. It can be accessed by pulling the charging handle on the top of the upper receiver towards the buffer tube.
Q: How hard does the Lancer Tactical Rapid Deployment Carbine Airsoft Gun shoot?
A: The Lancer Tactical Rapid Deployment Carbine Airsoft Gun shoots between 370-390 feet per second or about 1.5 joules.
Q: What magazines will the Lancer Tactical Rapid Deployment Carbine Airsoft Gun take?
A: The Lancer Tactical Rapid Deployment Carbine Airsoft Gun takes most standard Tokyo Marui M4 style magazines.
Q: How do I load the mid cap magazine included with the Lancer Tactical Rapid Deployment Carbine Airsoft Gun?
A: To load the included mid cap magazine you will need a tool called a speed loader. Those can be found on our website here. ( https://www.foxairsoft.com/search.php?search_query=speed+loader&Search=GO ) To use one of these you fill up the reservoir with bbs. Then line the nozzle up with the follower on the magazine and then push bbs in with the button.
