About the Lancer Tactical M4 Interceptor SPR (Gen 2):
The Lancer Tactical M4 Interceptor SPR has always been a solid and reliable starting airsoft rifle that we recommend to players. The newest version has recently been released and there are huge improvements made to an already dependable rifle. The body is now a solid nylon fiber compared to the ABS plastic of the old bodies. This makes it more durable than ever. The gearbox and hopup unit have been improved upon to make the performance reliable and accuracy consistent. As always the gun has a 9.6v battery included and a wall charger to get you going. The front of the gun features a rail system which allows you to attach most common accessories with ease. The included magazine is a 300-round high cap magazine.
What's Included In The Box:
-
Lancer Tactical M4 Interceptor SPR Airsoft Gun GENERATION 2
-
1 x 300 Rd. High Capacity Lancer Tactical Magazine
-
Lancer Brand 9.6 1600 mAh Butterfly Nickel-Metal Hyrdirde (NiMH)Battery
-
Yixin Electronic Wall Charger model number YX-4118D. Output DC 9.6v 250mA
-
Cleaning Rod
-
Lancer Tactical User Manual
Quick Overview:
-
Available in Black
-
Metal Gearbox with solid internals
-
Nylon Fiber Body and Outer Barrel
-
Crane Stock
-
Rail Interface System (RIS)
-
Removable rear backup iron sight
Technical Specifications:
-
Model Number LT-25B-G2, LT-25BL-G2, LT-25T-G2
-
Colors: Black
-
8mm Metal Bearings
-
Bearing Spring Guide
-
Long Type Torque Motor
-
Ported Piston Head
-
Cylinder Head: Plastic
-
One piece Hop-Up System
-
1:1 Scale of the real rifle with realistic detailing
-
Individually serial numbered
-
Body is made of a durable nylon fiber
-
Battery connector is a standard mini or small type Tamiya connector
-
Includes a single point ambidextrous single point sling mount.
-
Sight: Removable backup iron sights
Weight & Dimensions:
-
Dry Weight of gun without mag is only 3lbs 13 oz
-
Weight of gun with battery: 4lbs 10oz
-
Entire package weight: 7lbs 80z
-
Gun Length: 27.5 Inches (698.5 Millimeter) with collapsed Stock
-
Gun Length: 30.75 Inches (781.05 Millimeter)with extended stock
Q&A:
Q: What battery should I use in the Lancer Tactical M4 Interceptor SPR Gen 2 Airsoft Gun?
A: The battery compartment is located in the stock of the Lancer Tactical M4 Interceptor SPR Gen 2 Airsoft Gun allowing you to use most panel or butterfly type batteries. The gearbox is fully lipo ready and able to be used with a 7.4v or 11.1v lipo battery.
Q: Where is the battery compartment in the Lancer Tactical M4 Interceptor SPR Gen 2 Airsoft Gun?
A: The battery in the Lancer Tactical M4 Interceptor SPR Gen 2 Airsoft Gun sits in the stock of the gun. To access the compartment you pinch the two tabs on either side of the stock and then pull back on the rubber buttpad. Then you just need to remove the polymer stopper.
Q: What weight bbs should I use in the Lancer Tactical M4 Interceptor SPR Gen 2 Airsoft Gun?
A: We recommend using 0.25g-0.28g bbs for outdoor games for a great balance of range and accuracy. For indoor games 0.20g bbs will work well as you don’t have to account for wind or other environmental factors.
Q: Where is the hop up adjustment on the Lancer Tactical M4 Interceptor SPR Gen 2 Airsoft Gun?
A: The hop up adjustment on the Lancer Tactical M4 Interceptor SPR Gen 2 Airsoft Gun is located under the mock bolt. It can be accessed by pulling the charging handle on the top of the upper receiver towards the buffer tube.
Q: What magazines will the Lancer Tactical M4 Interceptor SPR Gen 2 Airsoft Gun take?
A: The Lancer Tactical M4 Interceptor SPR Gen 2 Airsoft Gun takes most standard Tokyo Marui M4 style magazines.
Q: How do you install the front rail on the Lancer Tactical M4 Interceptor SPR Gen 2 Airsoft Gun?
A: The front rail is installed with the two included screws. All you need to do is slide the two tabs into the rail and use the included screwdriver to install the screws.